25
LOCKING THE DEVICE ONTO THE HANGING FRAME
MAINTENANCE
Position the tilted
device on brackets
S1
.
Pivot the device
upwards and lift it to
position it on brackets
S2
.
Lower the device onto the
hanging frame. A click tells you
that the device is fastened and
locked in place.
1
2
3
To unlock the device from the hanging frame, take a flat-bladed screw-
driver and
push the slider
(located on the top left-hand corner of the
hanging frame behind the device)
towards the wall.
Lift the device while holding the slider in place with your
screwdriver.
Tilt it forwards and then remove it from brackets
S1
.
S1
CLIC
S2
To maintain your device’s performance, you must dust it approximate-
ly twice a year.
Never use abrasive products or solvents.
GB
