23
EN
-
For safety reasons, it is strictly forbidden to top up unmixed devices. If
necessary, contact the manufacturer’s After-Sales Service or a qualified
technician.
-
To ensure proper operation of the fan (depending on model), it is
recommended not to obstruct or cover the air outlet (especially with
a towel). Doing so may cause the fan to become unsafe.
-
Be careful not to place a bathrobe on the control box.
-
Before servicing the device, turn it off and allow it to cool down. Do
not use abrasive products.
-
When filling a Mixed device, the hot water circuit must necessarily be
used to allow the fluid to expand in the heating circuit.
-
Using the bleeder, make sure that the device is correctly filled. If,
when you open the bleeder, the water does not flow regularly, please
contact your fitter.
-
The use of this device without water would lead to the definitive
deterioration of the resistor. This incident would definitely require its
replacement, which is not covered by the Maker’s guarantee.
-
The service pressure of the heating circuit is 4 bar maximum.
-
It is forbidden to leave A switch on l when the supply tap C is open.
This abnormal use causes cancellation of the warranty.
-
It is mandatory to be in Central Heating mode when the supply valve
a
is open. This abnormal use causes cancellation of the warranty.
-
The boiler return tap
b
must obligatorily remain open, in all the case
of use in order to allow expansion of the fluid in the circuit so as to
avoid any damage to the device.
Device carrying this symbol must never be disposed of with
household waste, but must be collected separately for recy-
cling.
At the end of their life, products must be collected and re-
cycled according to local regulations and ordinances.
When an device is installed at a higher altitude, the air out-
put temperature rises (around 10° C per 1000 m rise in
ground).
