19
Operating instructions BW3-CTMC + BW3-RF
© 2011 by Thermoplan, subject to change
Daily cleaning actions (machine internal automatic cleaning process)
Additional daily cleaning (manual cleaning)
4.5 Cleaning
4 Operation, maintenance and cleaning
1. After cleaning process
- Clean milk container thoroughly.
- Clean suction tube thoroughly.
- Empty grounds drawer and clean it thoroughly.
- Clean drip tray thoroughly.
- Switch off machine. Empty and clean the bean hoppers (Instruction on
the next page).
3. Clean coffee outlet
With the choco spout removed unscrew the central screw.
Pull down the distribution block, clean it and reinstall the
block with the central screw.
2. Start automatic cleaning process
Press the cleaning button and hold it until the cleaning request appears.
Now follow the instructions shown on the display.
The cleaning process takes about 20 minutes.
1. Empty milk container
Remove and empty milk container. Rinse it with fresh water and put it back into the
fridge.
2. Clean choco spout
Pull the outlet head to the top position and remove the
little choco outlet clip from the spout. Clean thoroughly
with a small brush that no choco remains are left behind.
4. Clean choco module (weekly)
The choco module has to be cleaned weekly. The step-by-step instructions to this are on page 21 in the chapter
„4.7 Weekly cleaning of the choco module“.
Summary of Contents for Black & White BW3-CTMC
Page 51: ......
