6
For more information about our products and how to contact us, please visit thermopatch.com
4. Operating instructions
4.1 Operating the NL-35 v.3
Switch on the press by pressing the power switch located at the rear.
Adjust set point temperature (See 4.2.1.b).
Adjust sealing time (See 4.2.1 a).
Adjust the pressure (according to the type of transfer)
Place the garment on the lower platen.
Place the transfer.
Once the heating platen has reached the desired temperature, close the machine with the handle.
When the machine is closed, the timer starts running.
At the end of the sealing time, the press will open automatically.
If you want to interrupt the cycle, you can do it by pushing the stop button located on the control panel:
the press will then open automatically within 2 seconds (see 4.2.1).
4.2 Operating the control panel
The settings for time and temperature are shown on the LCD display
4.2.1 Sealing time and temperature settings
Presets (c)
Settings (d)
Current temperature
Stop cycle
Setpoint temperature (b)
Pressing time (a)
Counter & Mode
