11
For more information about our products and how to contact us, please visit thermopatch.com
5.2 Error codes
Error 1 = Temperature sensor short (0 Ohm)
Error 2 = Temperature sensor broken
Error 3 = Error in Eprom: the processor has no access to the memory for saving or reading of
information.
Error 4 (HS-4-C only) = Motor timed out, not in position or motor switch error:The correct position of the
Cam Arm Motor cannot be detected. Rotate the Cam Arm Motor Shaft checking actuation of the Motor
Detection Switch. Also, check wire connections on the Motor Detection Switch.
