20
3.7
DATA TRANSFER
The SM DUE is supplied with an internal reusable 1 ½ year databank. The
contents of this databank may be transferred directly to the PC using the
MASTERLINK Software or, alternatively, the MASTERLINK Hardware may be
used as an intermediate storage device to transfer data to a PC at a remote
location.
3.7.1 Transferring Data Using the Masterlink software
NOTE: Before data can be transferred to the PC, the software must be set
up on the PC, as per the MASTERLINK Software Manual.
(a)
Plug the 8 Way SX plug of the ‘PC Cable Assembly’ into the
SERIAL LINK of the SM DUE.
(b)
Then plug the 9 Way ‘female D type’ connector into any free serial
port in the PC.
NOTE: For Panelmount units, read section 3.8 before attempting to
download or print data.
3.7.2 Transferring Data to the Masterlink Hardware
(a)
Connect the ‘MASTERLINK Cable Assembly’, from the SERIAL LINK SX
socket of the SM DUE to the MASTERLINK Hardware.
(b)
Press the
key to reveal the following screen:
SM DUE
DATA TRANSFER
MASTERLINK
PRINTER
CANCEL
(c)
To download data to the Masterlink Hardware unit, (Part No. C0321), press
the
key and the following screen will appear:
