MASTERLINK HARDWARE INSTALLATION
Masterlink Contents:
1 X
PP3 Rechargeable Battery
1 X
Masterlink Hardware Module
1 X
Data Download Cable (to connect the hardware module to a
Thermomax unit)
Connecting The PP3 Battery:
1
Remove the sliding cover at the back of the Masterlink Hardware Module.
2
Connect the PP3 Battery, observing correct polarity.
This battery may be recharged when required by using a standard PP3
charger or the PP3 battery may also be charged by connecting the
masterlink hardware to the Thermomax datalogger unit using the data
download cable supplied. The Reader Module is auto-sensing and
switches itself off when not in use.
Note: The 1m download cable must be removed from the Masterlink
Hardware module before upload commences.
Connecting The Serial Cable:
Data Download Socket
PC Data Upload Socket
Connect to the Thermomax
Connect to the PC
Datalogger
2
