Voice Control:
Go to on the first page of your app. By clicking on “More” it shows all the voice control
systems that are supported by eWeLink, such as Alexa, Google Home, Google Nest, IFTTT and …. , by
clicking on each voice control system, it shows how to add your device to that system. For example
download "Google Assistant" app from your phone's app store. Open the app, click on the circle at the top
right of the page. Click on + Add and choose "eWeLink Smart Home" from the list. Insert your account
registration information. The voice command should be “Ok Google, turn {device name} ON” or OFF.
Setting
By clicking on
sign at the top right corner of the app page, you will go to “setting” and there you can
edit the device
Name,
update the
Firmware
version and enable
LAN
Wi-Fi for better reception. Turn the
Notification for operation
ON (it sends notification to your cellphone when you ON/OFF pump) Also
you can set the
Power-on state
status at ON, OFF or KEEP in case of power outage, when electricity cuts
off.
By enabling
Inching
mode, each timer event change to ON/OFF mode and you can add your events to
8 ON/OFF and by increasing or decreasing the time by second (max 3600sec=1 hour), you can define the
pump operation time. You need to sure LED2 on PCB is ON, enable Inching and change the inching
duration. You can check which shared user and when pump has turned ON/OFF from
History record.
Problems and solutions
There are 3 LEDs. LED1 is for Pairing, Showing WiFi status and Switching on/off manually after pairing.
LED2 indicates the working mode. ON: self-locking mode, OFF: inching mode. LED3 shows the status of
relay (ON: connected device is ON, OFF: connected device is OFF).
1.
DO101-P has been paired and added to the app successfully but stays “Offline”?
The reason can be that
DO101-P is placed too far from the router
, which causes a weak Wi-Fi signal.
You can place them together and i
f it doesn’t work,
t
urn your router, Smartphone and DO101-P OFF
and ON
and the problem should be solved. If it is still offline, just delete and add the DO101-P to the app
one more time.
2.
I cannot pair my Smartphone with DO101-P?
-Place DO101-P and your smartphone close to your router and make sure that your
Wi-Fi is set at 2.4G
(you can set it back to 5G after pairing). Also make sure your Mac address filtering is Off.
-If you have VPN on your Smartphone, remove it temporary.
-Delete the eWeLink app on your Smartphone.
-Turn OFF
your
“router” , “Cellphone” and “DO101-P”
all together and turn them back ON after 10 Sec.
Make sure LED2 on PCB is ON.
Before pairing, wait for 10 sec to 3 minutes until LED1
blinks slowly
.
-Download the app again (only from the App store or Google play,but not iCloud) and register an account.
-Try to pair your device once more & make sure you will
enter correct Wi-Fi password & user name.
When you enter the password you need to make sure that there is no blank space after the password, also
consider upper & lower cases characters. C
heck the video on YouTube by searching “pairing DO101”.
3.
LED3 blinks and pump opens and closes by itself?
There is a loose connection or the adapter is broken. Change the adapter with a new 5V one.
4.
I cannot change the Wi-Fi from 5G to 2.4G?
This unit won’t be paired if the Wi-Fi is at 5G. So, if you don’t see 2.4G in your Wi-Fi list,
type your router
web address (the numbers like 192.169.0.1) on Google and login to your router admin page (router web
address, Username and password is printed at the back of your router & Password can be your Wi-Fi
password). Click on “Wireless” (the one that takes you to the wireless setting, not wireless status). Click
on the “5G” tab and turn the “Wireless enabled” option OFF temporary and save the changes.
After
successfully pairing your device with your Smartphone you can change 2.4G to 5G again.
You can also
check our video on YouTube by searching “DO101 2.4G”
. If you cannot change this setting, contact your
Internet provider for more assistance.
5.
When the electricity cuts off or the device is unplugged, the pump will turn ON/OFF when power is
back or I plug it again?
The “Power-on State” is set at ON or OFF. Go to the setting and change “Power-on state” to KEEP.
