Technical explanations on thyristor controllers
The power element of the
thyristor controller consists at the TS1 1Ph... of two, at the TS1 3Ph of six antiparallel connected
thyristors, the isolated cooling system and the electronic regulation and watching.
Type description:
Construction:
The thyristor controller agrees with Low voltage directive: 2014/35/EU, EN60947-4-3 and
EMC Directive: 2014/30/EU, EN60947-4-3 Kl.A.
3.
The thyristor controller is more and more used in sectors in which bigger loads of ohm and inductive
loads have to be regulated.
Due to its modular, compact construction and its controlling by a continual control signal, these wattage
regulators become a perfect device for industrial control of wattage input.
The thyristor controller TS1 3Ph... is integrated within a plastic housing (PA, UL 94 V-0).
It consists of two basic elements:
Auxiliary Voltage:
The devices are powered internal by the mains voltage. Optional can devices with different mains
voltage be supplied with an external auxiliary voltage.
• power unit with heat sink and thyristor wiring
• control unit with ignition and control electronics (diagnostic display, control output, etc.)
• optional can devices with different mains voltage be supplied by an external auxiliary voltage
3
TS1 1Ph...
TS1 3Ph...
The following devices use a cooling plate:
TS1 (SP) 3Ph 02
TS1 (SP) 3Ph 04
The following devices use a heat sink:
TS1 (SP) 3Ph 06
The following devices use a heat sink with fan
TS1 (SP) 3Ph 08
TS1 (SP) 3Ph 10
power
connections
connections for the
control electronic
auxiliary contact at 100%
Thyristor controller
TS1 3Ph...
TS1 SP 3Ph...
Mains 100% U
a
PE
Y1 Y2 3 4 5
9
8
L1
T3
N
Option
L2 L3 T1 T2
L1
Monitoring LED’s:
TS1 SP 3Ph...
TS1 SP 1Ph...
single phase controller, phase angle control
three phase controller, multicycle control
single phase controller, multicycle control
three phase controller, phase angle control
Switch
Thermokon Sensortechnik GmbH - Thyristor controller TS1 3Ph, TS1 SP 3Ph