Issue date: 25.02.2016
Page 3 / 4
Thermokon Sensortechnik GmbH, Platanenweg 1, 35756 Mittenaar, Germany · tel: 02778/6960-0 · fax: -400 ·
SR65_DI_EasySens_Datasheet_en.docx © 2016
C
onfiguration with airConfig
NO airConfig needed if default settings will be used.airConfig and a EnOcean USB transceiver (i.e. USB300) will be mandatory if
the default EEP and other settings shall be changed.
Right-click on the device icon and send configuration to initiate the transfer of the new settings. As the sensor will be sleeping it
will need to be woken up by pressing the LRN button. Once the configuration has been transferred successfully into the device
the sensor will be highlighted in green. Highlighted in Red indicates a problem during the transmission.
Note:
Ensure during configuration transfer that the input is not closed.
The more frequently a device is programmed to wake up, measure and send data, the more energy is being consumed, which
can lead to insufficient energy charge of the sensor by ambient illumination.