EN
7
If the device overheats, the thermostat will be activated automatically, the device
will turn on automatically after cool down for about 30 minutes.
Usage
The electric heater has 3 built-in automatic shutdown timers and 2 heating power transfer
switches which are controlled by an infrared remote control and indicate the corresponding
status by 5 LED indicator lights.
There are 6 LED indicator lights on the panel of the heater as shown in the figure below.
A
B
C
D
E
F
G
Receiver
Figure 4
Indicator Light color Definition
A
Red
100% rated power heating, LED indicator
B
Red
50% rated power heating, LED indicator
C
Green
The heater is connected to the power supply but does not start heating
D
None
Remote signal receiver
E
Blue
1 hour automatic shutdown timer, LED indicator
F
Blue
2 hours automatic shutdown timer, LED indicator
G
Blue
4 hours automatic shutdown timer, LED indicator
The infrared remote control has two buttons and a light as shown in the figure below.
B
C
A
TIMER
ON/OFF
Figure 5
Indicator Marking Function
A
TIMER
Selector button of the automatic shutdown timer.
Each press cycles between, 1 hour, 2 hours, 4 hours, or no timer.
B
ON/OFF
Power on ON or OFF.
Each press cycles between, 100% rated power heating, 50% rated power
heating, or shutdown.
C
Transmit indicator light the infrared remote control.
When connecting the power plug with power supply, the green LED indicator will on. It
shows that the electric heater is connected to the power supply, but does not start heating.
If the device overheats, the thermostat will be activated and shut down the de-
vice automatically, the device will turn on again automatically after cooling down
for about 30 minutes.
manual thermoflow far infrared heater -en & fr.indd 7
2019/11/12 17:14
