Doc No.
5
November 2018
Configuration of New Suppressor
When a new suppressor
is plugged in, you’ll need to get into CM Configuration and open
up the Suppressor tab (ICS-6000) or Electrolytics tab (Integrion). Double click on the
Suppressor option and click OK to save the new configuration (see
Figures 3 & 4
below). If
this is not done, CM will not recognize the new suppressor.
Figure 3:
Suppressor Configuration in ICS-6000 DC Detector
Figure 4:
Suppressor Configuration in
Integrion
