![background image](http://html1.mh-extra.com/html/thermofisher-scientific/75002402/75002402_instructions-for-use-manual_1105582034.webp)
5
Maintenance and Care
Disinfection
5-4
Fresco 17 / 21
Thermo Scientific
4.
Inserting the filter again
t
he labelling
Front
must show to the front of the centrifuge.
5.
Push the filter upwards into the slot until the clip locks in the bottom plate.
Disinfection
Disinfect the centrifuge immediately whenever infectious material has spilled during centrifugation.
The rotor chamber and the rotor should be treated preferably with a neutral disinfectant.
Contact the Service Department of Thermo Fisher Scientific for questions regarding the use of other
disinfectants.
Disinfect the rotor and accessories as follows:
1.
Open the centrifuge.
2.
Turn off the centrifuge.
3.
Pull out the power supply plug.
4.
Grasp the rotor with both hands and lift it vertically off the centrifuge spindle.
5.
Remove the centrifuge tubes and
adapters
and dispose of them or disinfect them.
6.
Treat the rotor and accessories according to the instructions for the disinfectant. Adhere strictly to
the given application times.
7.
Be sure the disinfectant can drain off the rotor.
8.
Rinse the rotor and accessories thoroughly with water.
9.
Dispose of the disinfectant according to the applicable guidelines.
10.
Dry all of the rotors and accessorie
s
after cleaning with a cloth or in a warm air cabinet at a
maximum temperature of 50
°C.
11.
After cleaning, treat the entire surface of aluminum parts with corrosion protection oil
(70009824). Also treat the cavities with oil.
WARNING
Infectious material can get into the centrifuge when a tube breaks or as a
result of spills. Keep in mind the risk of infection when touching the rotor and take all
necessary precautions.
In case of contamination, make sure that others are not put at risk.
Decontaminate the affected parts immediately.
Take other precautions if need be.
CAUTION
Before using any cleaning or decontamination methods except those
recommended by the manufacturer, users should check with the manufacturer that the
proposed method will not damage the equipment.
Observe the safety precautions and handling instructions for the cleaning agents used.
Summary of Contents for 75002402
Page 42: ...6 6 Fresco 17 21 Thermo Scientific 6 Troubleshooting...
Page 51: ......