— 11 —
If signs of breakdown appear, restore the stainless
steel surface. First, thoroughly clean, rinse and
dry the surface. Then, on a daily basis, apply a
high-quality stainless steel polish according to
manufacturer’s instructions.
Heat Tint
Darkened areas, called heat tint, may appear on
stainless steel exposed to excessive heat, which
causes the protective film to thicken. It is unsightly
but is not a sign of permanent damage.
To remove heat tint, follow the routine cleaning
procedure. Stubborn heat tint will require heavy-
duty cleaning.
To reduce heat tint, limit the exposure of equipment
to excessive heat.
DRAINING WATER FROM HOT WELLS
1. Locate drain on rear of unit.
2. Attach drain hose to drain and run down to a
bucket or floor drain.
3. Locate “Drain” switch on front of unit, next to
the power switch.
4. Press “Drain” switch to “On” position, the light
on the switch should be illuminated.
5. Wait for all water to evacuate the hot well area.
6. Press Drain switch to “Off” position.
7. Wipe any excess debris or water from well.
Holding Pan
Figure 4: Cleaning the Dry Well
