9
40.020.950 - rev. 01 - 2019
English
IMAC 4000 OIL US
5
MAINTENANCE
5.1
Maintenance table
Use the table in this booklet to record performed
maintenance after each winter season.
5.2
General
Use the table in this booklet to record performed
maintenance after each winter season.
When the convector heater is to be stored for a
longer period of time:
1. Switch on the convector heater for three
minutes. This will protect the fuel pump
against corrosion.
2. Make sure the burner head is free from dust
and deposit.
A dirty heater head will cause insufficient
combustion, resulting in the development of
soot and carbon monoxide and causing
damage to the burner room.
3. Close the valve of the fuel supply.
4. Disconnect the power plug.
Warning
Switch off power during maintenance!
Hot
Do not touch the flue and air outlet!
Wait until the flue and the air outlet have
cooled down sufficiently before carrying
out any maintenance.
5.3
V-belts (Fig. 7 )
Impression
V-belt tension
13 mm
32,2 N
1. Remove the upper and lower side panels (A).
2. Lower the motor (B) by turning the adjusting
nuts (C).
3. Remove the old V-belts (D).
Install new V-belts in reverse order.
Caution
Tension the V-belts according to the
table.
Description yearly check.
Who
Check the fuel pump for leakage, corrosion and dirt.
User
Check the general condition of the pump, fans, ignition, photocell, burner, electrical
installation and heat exchanger.
Dealer
Check the fuel lines for blockages, corrosion and leakage.
User
Check the fan of the burner for corrosion and dirt.
User
Check the fan for corrosion and dirt.
User
Clean the filters of the fuel pump and the magnet valve.
Dealer
Check the photocell for signs of damage. Make sure the photocell is free from
dust and deposit.
User
Check the settings of the electrodes.
Dealer
Check the nozzle for dust, etc.
User
Clean the heat exchanger.
Dealer
Clean the inlet/outlet.
User
Check the V-belts.
User
Check the torque of the armatures. The torque value should be 60 Nm.
User
Summary of Contents for IMAC 4000 OIL US
Page 1: ...IMAC 4000 OIL US USER MANUAL...
Page 2: ...2 40 020 950 rev 01 2019 IMAC 4000 US A B C D E F G H I J K O P Q R 1 2 3 4...
Page 3: ...3 40 020 950 rev 01 2019 IMAC 4000 US 6 5 7...
Page 4: ...4 40 020 950 rev 01 2019 IMAC 4000 US Language English 5...
