16
40.019.003 - rev 09 - 2018
IMA
ENGLISH
16
40.019.003 - rev. 06 - 2011
IMA
English
English
Contents
Safety instructions.............................................16
Introduction .......................................................17
Getting started...................................................18
Operation ..........................................................19
Maintenance......................................................19
Troubleshooting ................................................21
Spare parts........................................................24
Technical information ........................................24
Installation of accessories.................................24
EC Declaration of conformity ............................24
Preface
This manual describes the use of the heaters as
mentioned on the cover. The information in this
manual is important for the correct and safe use
of the heater.
Identification of the product (Fig. 1)
The identification plate is attached to the side of
the heater. The identification plate shows the
following data:
A Year of production
B Serial number
C Electrical connection
D Airflow
E Capacity
F
Production code
Service and technical support
For information about the heater, please contact
your dealer or the manufacturer. Make sure you
have the type and serial number of the heater.
Guarantee and liability
For the Guarantee and Liability see the terms and
conditions.
Environment
1
SAFETY INSTRUCTIONS
1.1
Pictograms in this manual
1.2
Pictograms on the heater (Fig. 2)
A Hoisting instruction
B Reset keys of the thermostat
1.3
Pictograms on the burner (Fig. 3)
A Air quantity
B Air pressure
C Yellow sticker (not applicable for user)
D Pump pressure
E Red sticker (not applicable for user)
1.4
Use in conformity with destination
The heater is designed for use at construction
sites, showrooms, sports halls, transit sheds,
workshops, preparation areas, storage areas,
greenhouses, polyurethane tunnels, spray booth
heating and to dry agricultural products and bulbs.
Note
The heater is made of various metals
and plastics. The heater also contains
electronic components that must go to
electronic waste. Please consult your
dealer for more information.
Only applicable to the European
Union
Waste disposal of electric &
electronic equipment for business
use.
For further information regarding the
disposal of products for business use at
the end of their life span, please contact
your dealer or distributor in your country.
This product may not be disposed of
together with commercial waste or as
commercial waste.
Caution
A caution shows a danger that can
cause damage to the equipment.
Warning
A warning shows a hazard that can
cause death or serious injury.
Warning
When working on the heater for
maintenance or repair works always
disconnect the electric power!
Hot
Some surfaces are hot! Wait until these
parts are cooled down sufficiently before
maintenance is carried out.
Suggestions and advice for conducting
the relevant tasks or activities more
easily.
Summary of Contents for IMA 111
Page 82: ...82 40 019 003 rev 09 2018 IMA ...
