Thermo Scientific Vanquish Charger, Operating Manual

Page: 17 / 88

2 • Safety
Vanquish Charger Operating Manual Page 17
2.1.3 Safety Symbols on the Charger
The table lists the safety symbols that appear on the Charger or on
labels affixed to the Charger. Follow the safety notices in this manual to
prevent the risk of operator injury or damage to the Charger.
Symbol Description
Indicates a potential hazard. Refer to this manual to avoid the risk of
personal injury and/or to prevent damage to the device.

Ο
Power supply is on
Power supply is off
Indicates that the high LED output (according to IEC 62471:2006)
produced by the barcode reader in the device may be harmful to the
eyes. Do not use light-focusing instruments for viewing the light
output.
Indicates that liquid reservoirs or any other items must not be placed
on top of the Charger.
Indicates that sample racks and well plates must be placed with
position A1 in the front right corner.
2.1.4 Rating Plate/Type Label
The rating plate/type label is present behind the Charger front door, on
the left-hand side. The rating plate indicates the serial number, part
number, line rating, and the manufacturer's address.
An additional label on the left-hand side of the Charger near the
electrical connections indicates the fuse and line rating.