Thermo Scientific TriPlus RSH, User Manual

Page: 39 / 258

1
Getting Familiar with Your TriPlus RSH
TriPlus RSH Configurations
Thermo Scientific TriPlus RSH User Guide 13
TriPlus RSH Configurations
This section provides a brief overview of the various configurations of the TriPlus RSH as
applicable to the GC technique. The TriPlus RSH can be installed on the gas chromatographs
for sample introduction into up to: three injectors by using the standard module longitudinal
crossrail or four injectors by using the extended longitudinal crossrail.
The sampler may be configured in the following versions:
• “TriPlus RSH for Liquids” on page 13
• “TriPlus RSH for Headspace” on page 14
• “TriPlus RSH for SPME (Solid Phase Micro Extraction)” on page 14
• “TriPlus RSH for ITEX (In-tube Extraction)” on page 15
TriPlus RSH for Liquids
This version features the following characteristics:
• I njectors into which the sample may be introduced — S/SL, PTV, PKD, PPKD, and
OCI.
• Washing Station — Standard Wash Station, Large Solvent Wash Station, Large Solvent
Station, Fast Wash Station
• Sample Tray
– 15-position tray (Tray 15)
– 32-position tray (Tray 32)
– 54-position tray (Tray 54)
– 60-position tray (Tray 60)
– 96 positions Deep Well Plate DW96
– 96 positions Microtiter Plate MT96
– 384 positions Microtiter Plate MT384
• Sample Vial
– 0.5, 0.7, 2.0, 2.5, 10, and 20 mL
– 96/384 positions Microtiter or Deep Well plate
•
Syringe Types
— 0.5
μ
L, 1.0
μ
L, 5.0
μ
L, and 10
μ
L (standard); 25
μ
L, 50
μ
L, 100
μ
L,
250
μ
L, 500
μ
L, 1000
μ
L, and 10000
μ
L syringes for sample injection, volume transfer,
or both.
• Syringe Needle Length — 57 or 85 mm