Thermo Scientific thermoscientific Vanquish Pumps C, Operating Manual

Page: 270 / 296

12 • Accessories, Consumables and Replacement Parts
Page 270 Pumps C, Pumps F ( VC-Pxx, VF-Pxx)
Operating Manual
Normal-Phase (NP) kit
Description Part No.
Normal-Phase (NP) kit
To modify VC‑pumps and VC‑autosamplers for using normal-phase
compatible solvents and additives in a Vanquish Core system.
The kit includes the following items: NP compatible tubing and
seals for use as both piston seals and seal wash seals. To reorder
only the seals for maintenance, order part no. 6040.0306 (pack of
2 seals).
6036.3972
Degasser kit (VC-P40)
Description Part No.
Degasser kit VC-P40
To retrofit the isocratic pump with a vacuum degasser.
Thermo Fisher Scientific service personnel must retrofit the pump
with the degasser.
6045.3731
Mixing systems, inline filters
Description Part No.
Mixing systems, set inline filter
See
Optional Mixing Systems and Inline Filters ( } page 270) .
12.3.2 Optional Mixing Systems and Inline Filters
Each mixing system comprises a static mixer and a capillary mixer. The
volumes of both mixers determine the entire volume of the mixing
system.
TIP With mixing systems (volumes: 200 µL, 400 µL, 800 µL or 1550 µL),
only the static mixer is different from the static mixer with which the
pump is shipped. The capillary mixer remains the same. Thus, if you
want to change to this mixing system, you need to order only the static
mixer. If you want to replace the capillary mixer nevertheless, order the
appropriate part number as indicated in the table.
Static mixers
Description Part No.
Static mixers for use with 50 µL capillary mixer:
Static mixer, volume: 150 µL
(for total volume of mixing system: 200 µL)
Binary VF-pump, isocratic pump : The pump is shipped with the
mixing system with a volume of 200 µL.
With the isocratic pump, the mixing system serves as inline filter.
6044.5110