Section 6
Maintenance
Page 6-1
Warning
Prior to any maintenance or service on this unit, disconnect the
power cord from power source. Before reattaching unit to its power source,
be sure all volatile and flammable cleaners are evaporated and dry.
s
Avertissement
Avant d'effectuer toute maintenance ou entretien de cet
appareil, débrancher le cordon secteur de la source d'alimentation. Avant
de reconnecter l'appareil sur le secteur, s'assurer que tous les produits de
nettoyage volatiles et inflammables sont complètement évaporés.
s
The design of the chamber is such that periodic maintenance is kept to a
minimum. No lubrication or adjustments of components is needed.
Note
The unit chamber should be cleaned and disinfected prior to use.
s
6.1 Cleaning: Periodic cleaning is required. To clean the incubator,
perform the following steps:
6.1.1. Remove all of the interior parts, if assembled.
6.1.2. Clean the incubator with a mild soap and water solution,
including all corners.
Caution
DO NOT USE spray cleaners that might leak through openings
and cracks and get on electrical components, or that may contain solvents
that will harm coatings. DO NOT USE chlorine-based bleaches or
abrasives, as they will damage the painted interior.
s
6.1.3. Rinse with distilled water and wipe dry with a soft cloth.
6.1.4. Caution should be used when cleaning around the temperature
sensors to prevent possible damage to the sensors.
6.2 Disinfecting: Disinfect the incubator on a regular basis. To disinfect
the incubator, perform the following steps.
6.2.1. Remove all of the interior parts, if assembled.
Summary of Contents for Thermo Fisher 3900 Series
Page 5: ...Preface iv...
