Section 4 Controls Overview (continued)
Page 4-2
Quick Start Guide
Before Getting Started
FLY (Diurnal light operation): The unit comes from the factory
preprogrammed to run a 12 hour day and 12 hour night cycle using
one temperature setpoint by pressing the EZ1 button. The setpoint from the
factory is 20°C and the program is set to start the day cycle first at 8:00AM,
and the night cycle at 8:00PM.
BOD (Incubator only operation): The unit comes from the factory
preprogrammed to run at 20
o
C upon start up. See Operation Section 5 for
detailed operation instructions.
Before getting started, it’s a good idea to become familiar with the control
display and keys, terms, and factory steps. Doing so will make getting
started easier.
Easy Zone Infinite
Key 1
Key
Actual Process
Temperature
Display
Process
Setpoint Display
Output 1 Active
Heating
Element On
20.0
C
20.0
1 2 3
EZ1
EZ2
Up Arrow Key
Down Arrow Key
Output 2
Active
Output 3
Active
Easy
Zone
Advance
Key
Light On
Figure 4-1.
Control Panel
Calibration Key 2
Offset
Light On
Easy Zone Key 1 .............................................. Starts and stops program
Infinite Key ..................................................... Backs up one level or returns to normal display mode
Up Arrow Key .................................................. Raises setpoint or changes parameters
Ramp Symbol .................................................. Indicates program is running when active
Down Arrow Key............................................. Lowers setpoint or changes parameters
Advance Key ................................................... Scrolls through parameter list
Easy Zone Key 2 ............................................. Not in use but can be programmed
Output 3 Active Calibration, Offset Light On Indicates calibration is on
Output 2 Active Light On .............................. Indicates lights inside unit are on
Output 1 Active Heating, Element Light On .. Indicates heating element is on
Process Setpoint Display .............................. Factory preprogrammed setpoint
Actual Process, Temperature Display ................ Factory preprogrammed setpoint
Summary of Contents for Thermo Fisher 3900 Series
Page 5: ...Preface iv...
