Thermo Scientific Sarasota FD910, User Manual

Page: 35 / 61

Ordering Information
Sarasota FD960
Thermo Fisher Scientific Sarasota FD910, FD950, & FD960 User Guide
A-7
Table A–8. Sarasota FD960 instrument spares
P/N Description
21/107 Cleaning brush
ZR20-0117/B
Box seal ring
Table A–9. Sarasota FD960 installation accessories
P/N Description
ZB/MTL/D1
For use with smart headmounted electronics option with pressure transducer input (set of 3 barriers):
2x MTL728/28V-300 ohm for density meter power supply and pressure transducer loop power
1x MTL787S/28V-300 ohm + diode return to power HART signal loop 4–20 mA
ZB/MTL/D2
(CM515)
For use with frequency output option with connection to Sarasota CM515 (set of 3 barriers):
1x MTL787S/28V-300 ohm + diode return to power density meter
2x MTL755 dual channel 3V-10 ohm ac barriers
ZB/MTL/D3 For use with smart headmounted electronics option without pressure transducer input (set of 2 barriers):
1x MTL728/28V-300 ohm for density meter power supply
1x MTL787S/28V-300 ohm + diode return to power HART signal loop 4–20 mA
ISO/P+F/GH Isolation barriers for use with smart headmounted electronics option without pressure transducer input
(set of 2 barriers):
1x KFD2-STC3-Ex1 for HART signal loop 4–20 mA
1x KFD2-SD-Ex1.48 for density meter power; should be used when no earth ground is available or in
some countries or locations when the device is used in Zone 0 hazardous area
ISO/MTL
Isolation barriers for use with smart headmounted electronics option without pressure transducer input
(set of 2 barriers):
1x MTL5541 for HART signal loop 4–20 mA
1 x MTL5525 for density meter power; should be used when no earth ground is available or in some
countries or locations when the device is used in Zone 0 hazardous area