background image

3

Congratulations on your new Thermo Scientific Precision

Water Bath.

Precision Water Baths offer the versatility needed to han-

dle virtually any clinical laboratory procedure — incuba-

tion, inactivation, agglutination — as well as most serolog-

ical, pharmaceutical, biomedical, and industrial proce-

dures.

These water baths are available with chamber capacities

of 2, 5, 10, 20, and 28 liters. The 2 liter unit is available

configured with either a standard or shallow chamber.

Also, a dual chamber unit is available with 5 and 10 liter

chambers, with independent controls for each. All units

are available to operate from either 120 or 230 volts.

The baths work equally well with water or bath oil as the

medium. All models offer the same temperature ranges:

ambient to 60°C without the supplied cover, and ambient

to 100°C with the cover in place (within physical limita-

tions).

These baths are microprocessor controlled for precise

temperatures and reliable, trouble-free operation. Dual

thermostats — one controlling the set point temperature

and the other operating as a safety — virtually eliminate

the possibility of overheating. Although not designed to

operate dry, the bath will not be damaged if it is allowed

to run dry.

An energy-saving removable cover helps to reduce evap-

oration while helping to maintain a uniform, constant tem-

perature. The cover also allows the water bath to reach

higher temperatures. The hinged, see-through gable

cover features unique “fins” that keep hands away from

hot vapors for easier, safer opening. The cover stays

open at the 90° position or, because of its quick-attach

hinge, can be lifted off completely to accommodate large

glassware.

A plastic rim remains cool to the touch even when operat-

ing the bath at maximum temperature.

The unit features a power-on self-test of vital circuitry.

This test will automatically be performed each time you

turn on the unit. If problems are detected, the system will

indicate a warning message on the display.

Introduction

Summary of Contents for Precision WB159910-33





















Reviews: