Thermo Scientific Orbitrap Fusion Lumos MS, Getting Connected Manual

Page: 36 / 40

A
Installation Kits and Power Cords
MS Setup Kit
24 Orbitrap Fusion Series Getting Connected Guide Thermo Scientific
MS Setup Kit
Table 7. MS Setup Kit (P/N 80100-62003) (Sheet 1 of 2)
Image Item Quantity Part number
Communications connection
Connector plug, MINI-COMBICON™, 8-pin,
26.67 mm (1.05 in.) long, rated 160 V, 8 A (contact
closure) 2 00004-21512
– Ethernet cables, shielded Category 5e, 2.1 m (7 ft) long 2 00302-99-00036
– Ethernet power supply (rated 100–240 Vac, 50/60 Hz,
0.6/0.3 A input; 18 W, 12 Vdc, 1.5 A output) 1 00012-01-00039
Ethernet switch, 5-port gigabit 1 00825-01-00111
Gas connections
– Ferrule, brass, back, 1/4 in. ID 2 00101-04000
– Ferrule, brass, back, 1/8 in. ID 2 00101-02500
– Ferrule, brass, front, 1/4 in. ID 2 00101-10000
– Ferrule, brass, front, 1/8 in. ID 2 00101-08500
– Swagelok-type nut, brass, 1/4 in. ID 2 00101-12500
– Swagelok-type nut, brass, 1/8 in. ID 2 00101-15500
– Tubing, precleaned copper, 1/8 in. OD, 0.030 in. thick,
4.6 m (15 ft) long (for the UHP helium and UHP
nitrogen gases) 1
a
00301-22701
– Tubing, Teflon PFA, 1/4 in. (6.35 mm) OD, 0.062 in.
(1.57 mm) thick, 4.6 m (15 ft) long (for the HP
nitrogen gas) 1 00101-50100
– Fittings to connect the copper and PFA tubings to the
gas supplies (customer provided) – –
Solvent waste connection
Container, Nalgene™, 4 L heavy-duty; filling/venting cap 1 80100-20265