background image

 

iS50 ATR Module

Thermo Scientific

iS50 ATR Module User Guide

5

Compatible Software

Table 3.

Software compatible with the iS50 ATR module

Operating Precautions

To maximize the life of your ATR accessory or module, heed these precautions:

• Do not apply pressure to the bare crystal (the pressure tower should not be used for the 

background collection).

• Do not use the pressure device to crush a sample.

• Do not apply pressure to the crystal for extended periods.

• Make sure your sample will not react with the ATR crystal or crystal plate. Each material 

has unique characteristics. Please refer to the “Specifications” section for details.

• Do not scrape the crystal with extremely hard materials such as corundum, or with a knife 

to remove particles.

Software

Use for...

OMNIC™

Configuring the ATR workflow, including quantitative analysis and 
spectral search, and collecting and analyzing ATR spectra. For more 
information, see “

Your First Experiment

.”

To improve search results using a transmission reference library, use 
the Advanced ATR Correction feature in OMNIC software. For more 
information, refer to the “About the Advanced ATR Correction tool” 
topic in “

Tips for ATR Sampling

,” or open OMNIC Help Topics and 

find the “Using Advanced ATR Correction” topic.

OMNIC Specta™

Analyzing unknowns. This software includes enhanced algorithms, a 
spectral database and features for using your computer’s hard drive as a 
library. OMNIC Specta also offers a unique multi-component search 
feature that makes it easy to identify the spectra of mixtures.

TQ Analyst™

Creating quantitative and classification methods that can be used with 
OMNIC software. For more information, see the help system in your 
TQ Analyst software.

NOTICE    

• The diamond crystal, while very robust, can be broken if small, very hard materials 

(like cement or metal beads) are compressed against it at maximum pressure, or if the 
pressure tip is not centered on the crystal.

• Do not use the ATR module with concentrated sulfuric acid (H

2

SO

4

) or potassium 

dichromate (K

2

Cr

2

O

7

); they will react with the diamond crystal.

Summary of Contents for Nicolet iS50 GC-IR





































Reviews: