Operation
Installing a Smart Accessory
Thermo Scientific
Nicolet iS20 User Guide
5
Installing a Smart Accessory
To install a Smart Accessory™ in the sample compartment, lower the accessory into the sample
compartment and press gently downward until the accessory locks in place. Then rotate the
accessory lock (located on the top of the instrument at the back edge of the sample
compartment) so that it holds down the accessory.
Collecting Data With the Instrument
For information about collecting data with your instrument, please see the getting started
manual that came with the instrument.
Collecting Data With the Module
You must use Thermo Scientific™ OMNIC™ software to collect data. OMNIC can be started
by using the OMNIC shortcut on your system desktop. For additional information, please see
the OMNIC help (available through the Help menu in OMNIC) or the printed
documentation that came with the system microscope or spectrometer.
Note
• If you want to remove a Smart Accessory, simply reverse the steps in this procedure.
When you are not using an accessory, store it in a dust-free environment like a cabinet
or box.
• For information about installing other kinds of accessories, see
