Thermo Scientific Multidrop Combi nL User Manual Download Page 70

Page: 70 / 106

Maintenance

Regular and preventive maintenance

Thermo Scientific Multidrop Combi nL User Manual

Thermo Fisher Scientific

Figure 5–23.

Removing the reagent filter

Place a disposable reagent basin (Cat. no. 9510027) or a 96-well

plate filled with

detergent

, for example, filtered 1% Micro-90



[

International Products Corporation

]

or equivalent, under the

dispensing valves so that the liquid is in contact with the valves

(Figure 5–24).

Figure 5–24.

Cleaning the tubings using a reagent basin

Press the

EMPTY

button for several minutes.

Place another disposable reagent basin or a 96-well plate filled with

distilled and filtered laboratory-grade water

under the dispensing

valves so that the liquid is in contact with the valves

(cf. Figure 5–24).

Press the

EMPTY

button for several minutes.

Summary of Contents for Multidrop Combi nL











































































































Search results

Summary of Contents for Multidrop Combi nL

Reviews:

Related manuals for Multidrop Combi nL

Brands by name

Popular brands

Thermo Scientific Multidrop Combi nL, User Manual

Search results

Summary of Contents for Multidrop Combi nL

Reviews:

Related manuals for Multidrop Combi nL

Brands by name

Popular brands