Thermo Scientific Multidrop Combi nL User Manual Download Page 29

Page: 29 / 106

Routine Operation

Control panel

Thermo Fisher Scientific

Thermo Scientific Multidrop Combi nL User Manual

Figure 4–18.

Removing the reagent filter

This section describes the Multidrop Combi nL control panel and

internal software.
The keyboard is shown in Figure 4–19.

Figure 4–19.

Keyboard of the Multidrop Combi nL

The relevant keys and control buttons are described in detail below.

The arrow keys are used to select, modify and change the parameters

and to navigate in the display.

The

button is used to accept the selection.

The

START

button is used to start the dispensing protocol.

The

STOP

button is used to stop the protocol at any time. The plate

and dispensing valve head are returned to the home position.

While editing values, the changes can be discarded by pressing the

STOP

button.

Control panel

Keyboard

Keys

Control buttons

Arrow keys and OK button

START and STOP

control buttons

Summary of Contents for Multidrop Combi nL











































































































Search results

Summary of Contents for Multidrop Combi nL

Reviews:

Related manuals for Multidrop Combi nL

Brands by name

Popular brands

Thermo Scientific Multidrop Combi nL, User Manual

Search results

Summary of Contents for Multidrop Combi nL

Reviews:

Related manuals for Multidrop Combi nL

Brands by name

Popular brands