Thermo Scientific Micro-Tech 9101, Reference Manual

Page: 66 / 329

Initializing the Micro-Tech
Initializing the Software
2-26 Micro-Tech 9101/9201 Reference Manual, Rev J Thermo Fisher Scientific
The Micro-Tech display should currently look like this, if you chose
metric units.
1. Metric tonnes per hour (“t/h”) is the default value.
2. Repeatedly press the Choice button to select other rate units (shown
below), then press the Enter button.

“kg/mn”—Kilograms per minute

“t/mn”—Metric tonnes per minute

“percent %”

“kg/h”—Kilograms per hour
3. Press the down-arrow button to bring up the load-cell units screen
(go to page 2-25).
Metric Rate Units
BATCH
- DISPLAY SCROLL 4 -
Rate Units
> t/h <
READY ALARM CALIB
CHOICE