Thermo Scientific Micro-Tech 9101, Reference Manual

Page: 53 / 329

Initializing the Micro-Tech
Using the Console
Thermo Fisher Scientific Micro-Tech 9101/9201 Reference Manual, Rev J 2-13
the result, “Number of revolutions for test,” in Table 2–1 or Table
2–2 .
6. Multiply “Number of revolutions for test” by the time taken (in
seconds) for one revolution. Enter the result, “Time to complete test
revolutions,” in
Table 2–1 or Table 2–2 .
You are now going to familiarize yourself with the Micro-Tech’s
console, and use it to enter into the Micro-Tech all the data you entered
in
Table 2–1 or Table 2–2 .
Please see page 3-1 of the manual to familiarize yourself with the Micro-
Tech’s console and how to use it.
This section gives you step-by-step instructions to guide you through the
software-initialization process.
NOTE.
You must complete the entire software initialization and scale-
calibration procedure before putting the Micro-Tech into operation.
There are no shortcuts!

There are five steps in the software initialization process, as follows.

Enter the correct date and exact current time.

Choose the appropriate language for the display.
The Next Steps
Using the
Console
Initializing the
Software
Overview