Thermo Scientific Heraeus Multifuge 4KR Instruction Manual Download Page 2 | Manualshive

Page: 2 / 54

background image

© 201

4

Thermo Fisher Scientific Inc. All rights reserved.

Delrin, TEFLON, and Viton are registered trademarks of DuPont. Noryl is a registered trademark of SABIC
POLYCLEAR is a registered trademark of Hongye CO., Ltd. Hypaque is a registered trademark of Amersham Health As.
RULON A and Tygon are registered trademarks of Saint-Gobain Performance Plastics. Alconox is a registered trademark
of Alconox. Ficoll is a registered trademark of GE Healthcare. Haemo-Sol is a registered trademark of Haemo-Sol. Triton
X-100 is a registered trademark of Sigma-Aldrich Co. LLC.

All other trademarks are the property of Thermo Fisher Scientific Inc. and its subsidiaries.

Thermo Electron LED GmbH
Robert-Bosch-Straße 1
D - 63505 Langenselbold
Germany

Thermo Fisher Scientific Inc. provides this document to its customers with a product purchase to use in the
product operation. This document is copyright protected and any reproduction of the whole or any part of this
document is strictly prohibited, except with the written authorization of Thermo Fisher Scientific Inc.

The contents of this document are subject to change without notice. All technical information in this
document is for reference purposes only. System configurations and specifications in this document supersede
all previous information received by the purchaser.

Thermo Fisher Scientific Inc. makes no representations that this document is complete, accurate or error-
free and assumes no responsibility and will not be liable for any errors, omissions, damage or loss that
might result from any use of this document, even if the information in the document is followed
properly.

This document is not part of any sales contract between Thermo Fisher Scientific Inc. and a purchaser. This
document shall in no way govern or modify any Terms and Conditions of Sale, which Terms and Conditions of
Sale shall govern all conflicting information between the two documents.

Original instruction manual 20057760-

c

printed in

08 /

201

4

.

Instruction manual 20057761-

c

is a translation of 20057760-

c

.

«
1
2
3
4
...
»

Summary of Contents for Heraeus Multifuge 4KR























































Reviews:

No comments

Related manuals for Heraeus Multifuge 4KR

Brand: OMCA Pages: 72

Brand: Barko Hydraulics Pages: 92

Brand: KaVo Pages: 16

Brand: ParaBody Pages: 6

Brand: Sailmon Pages: 10

Brand: B&W Tek Pages: 12

Brand: b&o Pages: 46

Brand: Parker Pages: 39

Brand: Pablo Pages: 7

Brand: Taurus Pages: 24

Brand: iFIT Pages: 11

Brand: neofeu Pages: 28

C-HB-A-LB2-SCCT Series

Brand: C-LITE Pages: 9

X-431 Torque HD

Brand: Launch Pages: 3

Brand: Kanlux Pages: 4

Brand: Airway Pages: 2

Brand: Crazy Foil Pages: 8

Brand: Audio Precision Pages: 76

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands