8 S
EGMENT
P
ROGRAMMABLE
M
ODEL W
/OTP
32
2. Press the PAGE button until display reads
, “Atun
LiSt.
”
3.
Press the SCROLL button
until “drA OFF” is
displayed.
4. Press the UP or DOWN button to
select “on.”
5.
Press the SCROLL button
until “drA.t” is
displayed.
6.
Press the UP or DOWN button until the desired
trigger value is achieved.
Caution
Do not overload your furnace
chamber. If the load is to be heated
uniformly it should not occupy more
than the center two-thirds of the
furnace chamber. Failure to observe
this caution could result in damage to
furnace components.
Furnace Loading
1.
For best results, use only the center 2/3 of the
furnace chamber.
2.
If you are heating a number of small parts,
spread them throughout the center two-thirds of
the furnace chamber.
3. Keep objects away from thermocouple.
4.
Use insulated tongs and mittens when loading
and unloading furnace.
5. Always wear safety glasses.
6.
Use the hearth plates supplied to protect bottom
of chamber. Part # PHX2.
