7
Elite ORP Tester Operating Instructions
Specification
Elite ORP
General Specification
Display
Graphics, Dot Matrix 80X100 Pixel
Backlight
Yes, Selectable ( 30sec from the last key press)
Auto off
8.5 minutes ( From Last Key press)
Reset
User / Factory
Hold Function
Yes
Power requirement
Four AAA 1.5 V batteries
Battey life
>250 hours
Water proofing
IP67
Regulatory Certifications
CE, FCC
Environmental Operating Conditions
Ambient Operating Temperature
5°C to 45°C
Relative Humidity
5% to 85% Non-Condensing
Storage Temperature
-20°C to 60°C
Storage Humidity
5% to 85%, Non-Condensing
Accessories
Ordering Code
Product Description
ORP Tester
ELITEORP
Elite ORP tester with batteries
Storage and Cleaning Solutions
ECRE005
Storage solution for ORP sensor, 480 mL
ECDPCBT
Protein remover solution, 480 mL
Other Accessories
ELITECAP
Replacement sensor cap
TSLANYARD
Tester lanyard
Self Diagnostic Messages
Batteries are weak and need replacement soon.
stable error
Appears when calibration is attempted but the reading is not yet
stable. Wait for the reading to stabilize or manually confirm the
calibration by pressing enter.
over range
The reading is above the measuring range of tester.
under range
The reading is below the measuring range of tester.
