Thermo Scientific Dionex, Operator'S Manual

Page: 78 / 228

Dionex Integral Systems Operator’s Manual
66
Doc. 065250-06 03/2020
4.5 SS Leak Sensor and Liquid Drain
A leak sensor is located inside the SS enclosure in the bottom front of the
enclosure (see
Figure 4-4 ). If the sensor becomes wet, it reports a leak to
Chromeleon 7 and an error message is displayed in the audit trail.
Any liquid that collects in the bottom of the SS exits through the drain port in the
tray at the front of the SS enclosure. A drain line can be connected to this port, if
you want.
Figure 4-4. SS Leak Sensor and Drain Port
Leak Sensor
Drain Port