Thermo Scientific Dionex, Operator'S Manual

Page: 15 / 228

1 • Introduction
Doc. 065250-06 03/2020
3
1.1.1 Dionex Integral System Components
The Dionex Integral Process Analytical Systems product line includes the
following components:
•
AE Analyzer Enclosure
•
LE Liquids Enclosure
•
SP Sample Preparer
•
SS Stream Selector
AE Analyzer Enclosure
The AE provides the liquid and gas connections, electrical connections,
electrical emissions shielding, and environmental protection often needed
in a process environment. The AE must be mounted on a wall, on top of
an LE Liquids Enclosure (see below), or on another appropriate support
structure.
LE Liquids Enclosure
The LE provides an enclosure for housing standard and reagent bottles, as
well as NOWPak
®
containers (for eluents and solvents). The LE includes
a gas supply control panel. The LE can provide a rolling base for an AE
Analyzer Enclosure.
SP Sample Preparer
The SP contains the valves and pumps required for sample and standard
preparation. Electronics built into the SP are used to control the SP
components. The SP is available in three versions (see
Section 3.1 ).
SS Stream Selector
The SS can select one of 7, 14, or 21 sample streams, depending on the
number of valves installed inside the enclosure. Sample streams can be
continuously flushing or static, and can be returned to the process or
directed to waste.