(1) Turn on the switch at the right bottom of the unit.
[Booting] [Stand by]
(2) Dial the knob and set the desired RPM.
(3) Run time can be verified during shaking if you press
button.
Display returns to previous display about after 10 seconds.
(4) You can stop the unit if you rotate or press the dial knob.
(1) Press button when the unit stops.
(2) Time input display shows when you press the dial knob.
* Input Hour/Min : Hour blinks during setting.
STEP 1: Input hour by rotating dial knob to right or left direction.
STEP 2: Press dial knob 1 time.
STEP 3: Input minute by rotating dial knob to right or left direction.
STEP 4: Press dial knob 1 time. Display moves to next mode (RPM
setting)
4-2
Magnetic Stirrer
Thermo Scientific
Section 4
Operation
Start and Stop
How to Set the Timer
Run Time
Turn right
Current rpm
