3-2
Magnetic Stirrer
Thermo Scientific
Section 3
Installation
Fixing Feet and
Keeping Balance
STEP 1: Gently press the feet on the table.
STEP 2: Check that the shaker is level.
Install the provided tray with main body as follows. It can be used by
installing non-slip pad as necessary.
STEP 1: Put the protrusions of tray into the 4 holes of main body.
STEP 2: Check if the tray is fitted perfectly.
Connect the electric power to the unit according to the following process.
STEP 1: Switch off the main switch before connecting AC power cable.
STEP 2: Connect the power cable to the socket located on the unit back.
• Use only the power cord supplied with unit.
Tray Installation
Rubber band
Silicone pad or Sticky pad
Tray
Connecting the
power cable
Power switch
Connecting to the
Mains Power Supply
