manualshive.com logo in svg

Thermo Scientific Barnstead GenPure, Operating Instruction

Share
Download
Thermo Scientific Barnstead GenPure Operating Instruction Download Page 72

13

  Maintenance

Disinfection

66

         GenPure

Thermo Scientific

Disinfection

Disinfection must be regularly carried out, at the latest when the ultrapure cartridge 
is replaced, or when bacteria is present in the product water.

Do not stop a disinfection process that is in progress. After faulty disinfection, carry 
out a new disinfection.

If the system was longer time not in operation, it must be going to be a disinfection 
process.

A Disinfection cartridge (Catalog no. 09.2201) is required for disinfection of the system.

Use cleaning solutions as follows:

Cleaning Solution, 1 syringe, Catalog no. CMX 25.

For effective disinfection the cartridge must be completely filled with distilled or 
deionized water.

Wear protective gloves for handling syringe of cleaning solution.

Wear safety goggles when working with cleaning solution. 

Please observe the information given in the safety data sheet supplied with 
disinfectant to avoid possible health hazards.

Summary of Contents for Barnstead GenPure











































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands