Thermo Scientific Alpha RES 1000, Manual

Page: 11 / 34

Operating Instructions Alpha RES 1000
6
4.2 Function Groups
The main function and sub-function groups are organised in a matrix format for configuration and selection of
parameters. The main function groups are:
1)
Temperature Coefficient settings (
tC
)
2) Temperature Measurement / compensation settings (
SEt
o
C
)
3) Control relay 1 configuration (
SP1
)
4) Control relay 2 configuration (
SP2
)
5) Control type (
Cntr
)
6) Current output (
rng
)
7) Configuration (
ConF
)
8) Calibration (
CAL rES
)
rng
Cntr
SETUP HOLD
tc
SEt
SP1 SP2
rES
o
C
SETUP HOLD
SETUP HOLD
SETUP
HOLD SETUP HOLD
SETUP HOLD
SETUP HOLD
SETUP HOLD
Set-up parameters can be viewed or changed by entering a security code. See Section 5.2 for security code
information.
4.2.1 How to view operating parameters without access to change them:
000
S.Cd
a) Press ENTER key. Display will prompt to enter security code (S.Cd).
Leave security code at “000” (do not enter a security code).
b) Press ENTER key again. This allows for viewing (not change) any sub-
functions’ settings.
c) Press
Δ
or
∇
keys to scroll through sub-functions.
d) Press ENTER key at a particular sub-function to view in detail.
e) Press ENTER key to return to sub-function menu.
f) Press
Δ
and
∇
keys simultaneously (Escape key) at any time to return to Measurement mode.
Note: To simplify operations, the controller will not display parameters that are not relevant to a particular sub-
function.