Thermo Scientific
Accela 600 and 1250 Pump Hardware Manual
63
4
Instrument Driver Configuration
You can control one or two Accela pumps from the Thermo Scientific chromatography data
system or mass spectrometry application. For the Xcalibur 2.1.x or later data system, you
configure the pump for instrument control in the Foundation platform.
To add instrument control for the Accela pump to the data system configuration, follow the
appropriate procedure in this chapter.
ChromQuest Instrument Configuration
To control the Accela 600 Pump or the Accela 1250 Pump from the ChromQuest data
system, add an Accela instrument to the ChromQuest Enterprise or add the pump to an
existing Accela instrument.
An instrument can include one or two Accela pumps.
To add a new Accela instrument to the ChromQuest Enterprise
1. Open the ChromQuest data system.
The Main Menu window appears (see
Note
To configure the pump for data system control, the pump must be turned on and
connected to the data system computer.
Contents
•
ChromQuest Instrument Configuration
•
Xcalibur Instrument Configuration
•
Foundation Instrument Configuration
•
Specifying the Leak Sensor Settings in the Xcalibur Data System
IMPORTANT
If the Instrument window of the ChromQuest data system is open,
close it. You can access the Main Menu window from the Instrument window and
modify the instrument’s configuration while the Instrument window is open, but you
must exit the Instrument window for the changes to take effect.
