Thermo Scientific 5028i, Instruction Manual

Page: 44 / 330

Installation
Setup
2-8 Model 5028
i
Instruction Manual Thermo Fisher Scientific
Figure 2–2. Model 5028
i
Side View—inches [millimeters]
It is also important to locate the roof flange installation in vertical
alignment with the inlet of the instrument. By reviewing the top
view drawing of the instrument ( Figure 2–2 ), the roof flange must be
centered in direct alignment with the 5/8-inch OD tube entering the
5028 i instrument.
Figure 2–3. Model 5028
i
Top View—inches [millimeters]
Once the x-y coordinates of the instrument and roof flange system are
established and a waterproof flange system has been installed, perform a
Heater