5
CENTRIFUGE
TUBES
4.0
ROTOR SELECTION GUIDE
Working
Volume (ml)
Number
of Tubes
Description
Rotor
Model
RH40-11
RH64-11
RH120-11
RH100-8
RH40-6
RH100-6
RH20-12
RH40-12
RH72-12
RH20-12
RH32-13
RH8-18
RH6-18-150
RH10-15
RH6-50
RH8-50
RH4-100
RH60-12-40
RH60-12-40
RH12-20
RH24-15
RH12-20
RH24-18
RH12-28
RH2MP
RHDW2MP
1.5 - 2.0 ml
1.5 - 2.0 ml
1.5 - 2.0 ml
0.5ml (8 x 29mm)
0.4ml (6x 50mm)
0.4ml (6 x 50mm)
12 x 75mm
1.5 - 2.0 (12 x 75mm)
12 x 75mm
13 x 100mm
13 x 100mm
18 x 100mm, 17 x 95, 16 x 100
18 x 150 mm
15ml conical (16 x 120mm)
50ml conical (28 x 115mm)
50ml pear shaped flask
100ml pear shaped flask
12 x 32mm
12 x 40mm vials
20 x 47mm v-vials
1 dram vials (15 x 45mm), 4ml
20 x 60mm v-vials
18 x 52mm mini-scintillation vials
28 x 60mm scintillation vials
Microplates
Deepwell Microplates
40
64
120
100
40
100
20
40
72
10
32
8
6
10
6
8
4
60
60
12
24
12
24
12
2 plates
2 plates
1.2 - 1.6
1.2 - 1.6
1.2 - 1.6
0.3
0.3
0.3
4
4
4
8
8
10
25
12
40
35
80
2
2.0
2.4
3
4
5.6
16
0.3
2.0
MICROCENTRIFUGE
TUBES
MICROTITER
PLATES
(Shallow)
VIALS
GLASS AND
PLASTIC TUBES
FLASKS
DEEPWELL
PLATES
To End Run There Are 2 Steps:
10.
Close manual bleeder and allow atmospheric air to bleed into the chamber.
11.
To stop rotor, press RUN/STOP button, (GREEN light is OFF). Display shows
END. Once rotor stops turning, cover lock opens. The display reverts to last
set-parameters.
12.
Open cover and remove samples.
NOTE: Pressing “VIEW” at anytime will allow viewing of setpoints.
