Thermo Pride OL6FA072D48B, Installation And Operation Manual With Users Information Section

Page: 3 / 50

All installations and services must be performed by qualified service personnel.
i
I. SAFETY SECTION
This page contains various warnings and cautions found throughout the Oil
Furnace Manual. Please read and comply with the statements below.
c
WARNING AND CAUTIONS:
c
WARNING:
This furnace is not to be used as a construction heater.
See Page 1.
c
CAUTION MUST BE TAKEN NOT TO EXCEED 90° ROTATION (OF
THE FLUE ELBOW) COUNTERCLOCKWISE OR RIGHT FROM THE
VERTICAL POSITION.
c
WARNING: The predetermined limit location on this oil fired furnace has
been tested and approved by Thermo Products, LLC. Any attempt to relocate
this safety control or replace this safety control with a control that is not
approved, or is incompatible, may result in personal injury, substantial property
damage or death.
c
WARNING: THE HEAT EXCHANGER MUST BE CLEANED BY A
QUALIFIED SERVICE PERSON.
c
CAUTION: DO NOT ATTEMPT TO MAKE REPAIRS YOURSELF!
c
WARNING: The area around the furnace should be kept free and
clear of combustible liquids and material, especially papers and rags.
c
WARNING: NEVER burn garbage or refuse in your furnace. Never try
to ignite oil by tossing burning papers or other material into your furnace.
c
WARNING: This oil furnace is designed to burn No. 1, No. 2, or B5 distillate
fuel oil. NEVER USE GASOLINE OR A MIXTURE OF OIL AND GASOLINE.
c
CAUTION: DO NOT ATTEMPT TO START THE BURNER WHEN:
Excess oil has accumulated,
1.
The furnace is full of vapors
2. The combustion chamber is very hot.
IF ONE OR MORE OF THESE CONDITIONS EXIST, CONTACT A
QUALIFIED SERVICE PERSON. See Page 20.