All installations and services must be performed by qualified service personnel.
39
Figure 9
C. INDUCER BLOWER ASSEMBLY
Inspect the pressure switch and tubing connections and inspect the blower/assembly
for warpage, deterioration and carbon or other build-up. If necessary, clean the
accessible portions of the housing and blower with a damp cloth. Vacuum to remove
any lint or dust from the motor assembly.
D. INSPECTING THE VENTING SYSTEM
The venting system should be inspected during the annual maintenance check-up or
during each subsequent service call.
Check all vent pipes for restrictions due to soot, or carbon build-up, as well as foreign
matter, or any materials, that cause the venting system to restrict the proper venting of
