![background image](http://html1.mh-extra.com/html/thermo-pride/clhs1-050p36n/clhs1-050p36n_users-information-manual_1104454010.webp)
All installations and services must be performed by qualified service personnel.
10
III. FURNACE OPERATION
A. WARNINGS BEFORE OPERATING
: A fire or explosion may result causing property damage, personal injury or loss of
life if you do not follow these instructions exactly.
A. This appliance does not have a pilot. It is equipped with an ignition device which
automatically lights the burner. Do not try to light the burner by hand.
B. BEFORE OPERATING - Smell all around the appliance area for gas. Be sure to smell next to
the floor because some gases are heavier than air and will settle on the floor.
WHAT TO DO IF YOU SMELL GAS
* Do not try to light any appliance.
* Do not touch any electric switch, do not use any phone in your building.
* Leave the building immediately.
* Immediately call your gas supplier from outside.
* Follow the gas supplier’s instructions.
* If you cannot reach your gas supplier, call the fire department.
C. Use only your hand to move the gas control switch/valve. Never use tools. If the switch will
not move by hand, don’t try to repair it, call a qualified heating contractor. Force or attempted
repair may result in a fire or explosion.
B. OPERATING INSTRUCTIONS
TO START THE FURNACE:
1.
Please read the safety information in this book before operating furnace.
2.
Set the thermostat to the lowest setting.
3.
Turn off all electric power to the appliance.
4.
Remove the combustion burner door. (This is the door which does not have a view window.)