![background image](http://html1.mh-extra.com/html/thermo-king/098916/098916_maintenance-manual_1104333071.webp)
Operating Instructions
70
Operating Instructions
Commands Menu
The Commands menu displays a list of tasks that
can be activated. The following commands are
available:
PTI (Full PreTrip) Test:
Controller automatically
completes a test of individual components, checks
unit refrigeration capacity, heating capacity and
temperature control. The test takes approximately
2-2 1/2 hours to complete. See “PTI (Full Pretrip)
Test” on page 75.
Power Management:
Sets power limit and power
limit activation (“On”) time.
Function Test:
Controller automatically tests the
operation of individual unit components. This is
not a performance test of the complete system.
See “Function Test” in this chapter for test details.
Manual Function Test:
Controller tests individual
components selected by the technician for
diagnosis. LCD display will show expected and
actual current of the component being tested.
Brief PTI (Brief Pretrip Test):
Controller
automatically completes a test of individual
components, checks unit refrigeration capacity,
heating capacity and temperature control. The
Test takes approximately 20-25 minutes to
complete. See “Brief PTI (Pretrip) Test” on page
71. Also refer to Full PTI Test above.
A complete listing of the controller operating
menu is located on an 11” x 17” fold out on the
last page of this manual.
View the Commands Menu
With the
U
NIT
O
N
/O
FF
switch
O
N
and LCD
display showing standard display (setpoint):
1. Press the
F2
or
F3
key to enter the Main
menu.
2. Press the
F2
or
F3
key to scroll through Main
menu until [COMMANDS] appears in LCD
display.
3. Press the
F4
key to access Commands menu.
The first command in submenu appears in
LCD display.
Figure 39: Commands Menu
4. Press the
F2
or
F3
key to scroll to desired
command:
•
[PTI] [(Pretrip) TEST]
•
[POWER MANAGEMENT]
•
[FUNCTION TEST]
•
[MANUAL FUNCTION TEST]
•
[BRIEF PTI TEST]
Press the
F4
key to activate command selected.
CAUTION: The PTI test should only be
performed on an empty container!
Commands
Menu
- PTI Test
- Power Management
- Function Test
- Manual Function Test
- Brief PTI Test
ALARMS
DATA
RMM STATE
CONFIGURATION
MISC FUNCTIONS
COMMANDS
MAIN MENU
DATALOGGER
NOTE: All screens are NOT
present on all units. The
screens that display on the
controller are determined by
the Controller Software
settings and the options
installed on the unit.
Summary of Contents for 098916
