95 Series Operator’s Guide
2-4
71-0011 — REV E
Display Board/Display Cable
The display board is attached to the main board by a
nondetachable ribbon cable.
Liquid Crystal Display (LCD)
The LCD panel is visible through the window in the top of the
housing. A red LED is visible through the display panel as a
visual indication of alarm conditions. Display readings are
described in Chapter 3.
Buzzer
The buzzer is mounted on the main board.
Housing/Housing Gasket
The instrument housing is a two-piece plastic case held together
by two captive screws. A mylar gasket covers the operator
controls to keep water and dust away from the internal
components. The case is sealed using a detachable rubber gasket
and two flaps to protect the operator controls and earphone/
vibrating alarm jack.
The letters Z, P, and S on the inside of the flap identify the
position of the ZERO/- button, the power switch, and the SPAN/+
button, respectively. The arrow next to the P indicates the
direction to move the power switch to turn the instrument on and
off.
