5) Insert the probe in the bottle and press the cap down on the neck of
the bottle.
Note:
If you have opted for an 8 or 11 liters bottle (3 or 5 gallons), you will
have to push down the cap along the probe until it sits on the neck of the
bottle (clockwise rotations might be required).
6) Finally, put everything back together by doing the steps in reverse
order (3, 2 then 1), in order for the loading platform to be back in its
original position.
Note:
After the machine is plugged in, the water will take approximately
half an hour to become cold (this can vary depending on the thermostat
adjustment).
When the cap is pressed on the neck of the
bottle, complete a slight rotation clockwise
to activate the lock mechanism of the cap.
4
WATER COOLER USE AND BOTTLE REPLACEMENT (CONT'D)
OWNER MANUAL:
BEAUFORT
- Edition 2
