THERMO 2000 VENTUM, Installation And Operation Manual, Page: 22 / 34

VENTUM HYDRONIC AIR-HANDLER Installation and Operation Manual (Revised: June 2021)
22
Table 10 : VENTUM 60 Parameters
Menu Parameter Description Default Value Possible Values


Target hot water outlet
temperature in °F
 

Target cold air outlet
temperature °F
 

Target temperature for the fan
to stop after a demand for air
conditioning
 

Target temperature for the fan
to stop after a demand for air
conditioning
 


Air flow in heating mode
(stage 1) in cubic feet per
minute (CFM)
 

Air flow in heating mode
(stage 2) in cubic feet per
minute (CFM)
 

Air flow in cooling mode
(stage 1) in cubic feet per
minute (CFM)
 

Air flow in cooling mode
(stage 2) in cubic feet per
minute (CFM)
 

Air flow in ventilation mode in
cubic feet per minute (CFM)
 

Percentage of air flow in
cooling mode during a
dehumidification request
 


Zone mode
activation/deactivation




Selection of the O or B contact
from the thermostat. Off if
none.





Activation/deactivation of
boost mode





Error code in the event of an
alarm

See Troubleshooting

Alarm buzzer activation





Water temperature at the
radiator outlet
- -

Air inlet temperature in the
unit
- -

Air outlet temperature - -

Current estimated exchanged
power
- -
NOTE:
The “
Oorb
” parameter MUST be adjusted according to the signals sent by the thermostat. If this parameter
is not updated, the hydronic air-handler may not operate as required. This parameter is present in order to ensure
compatibility with most thermostats.