16
ENGLISH
INSTALLATION
The casing and insulation can be removed to facilitate
access into the place of installation. To do so, proceed
as follows.
- Remove the plug (2). Unscrew the two fixing screws
and remove the top insulation section (3).
- Remove the protective fitting plugs (4).
- Unzip the plastic cover (5).
- Remove the insulation shells (6).
Reverse the above steps to fit the insulation again
.
b
Make sure that the insulation shells (7) are securely
fixed in place by straps before fitting the plastic
cover. Use a strap wrench if necessary.
b
Wear suitable personal protective equipment and
use suitable safety devices.
a
Do not dispose of packaging material into the envi-
ronment, or leave it within the reach of children,
since it can become a potential hazard. Dispose of
packaging material in compliance with applicable
legislation.
2
3
4
5
6
Summary of Contents for THE/COMBI3 1000
Page 1: ...THE COMBI3 INSTALLATION AND MAINTENANCE MANUAL...
Page 27: ...27 ENGLISH...
